Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Rear Door Lower Sash

Removal and Installation

REMOVAL

CAUTION:

Never damage rear door glass and rear door panel.

Remove rear door glass run. Refer to Removal and Installation.

Remove rear door inner frame rear. Refer to Removal and Installation.

Fully close rear door glass.

Remove mounting bolt , and then remove rear door lower sash lower.

CAUTION:

When removing rear door lower sash lower, disengage fixing portion by arrow direction as shown in the figure.

Fully open rear door glass.

Remove hole seal 1 and hole seal 2 from rear door panel.

Loosen upper side mounting bolt and remove lower side mounting bolt , and then remove rear door lower sash upper.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

  • When installing, insert portion of rear door lower sash lower to hole of rear door lower sash upper as shown in the figure.

  • Tighten rear door lower sash mounting bolt to the specified torque. Refer to Exploded View.

  • Never reuse hole seal. Always replace it with a new one when it is removed.

  • After installing, check the rear door glass can be move smoothly. If it could not move smoothly, check the rear door glass run and rear door lower sash lower glass run has installed to rear door lower sash lower and upper correctly.

    Other materials

    Brake System Tools and Preparation
    Commercial Service Tool Tool name Description Flare nut torque wrench a: 10 mm (0.39 in), 11 mm (0.43 in), 12 mm (0.47 in) Installing brake piping Brake caliper wrench Return the piston (Front brake caliper) Brake caliper wrench Return the piston (Rear brake caliper) Lu ...

    Repairing Material
    Foam Repair During factory body assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foam insulators.URETHANE FOAM APPLICATIONSUse commercially available Urethane foam for sealant (foam materi ...

    Commercial Service Tools Or/and Repair Part
    AUDIO, VISUAL & NAVIGATION SYSTEM : Commercial Service Tools or/and Repair Part Tool name Description Power tool Loosening nuts, screws and bolts ...