Removal and Installation
REMOVAL
CAUTION:
When disconnect the A/C piping related parts, cap or wrap the joint of those parts with suitable material such as vinyl tape to avoid the entry of air.
Remove rear evaporator. Refer to Removal and Installation.
Remove mounting bolts 
, and then remove rear expansion valve 
and rear evaporator pipe 
from rear evaporator.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
To prevent leakage of refrigerant, replace the O-ring with a new one. Apply a coat of compressor oil to the O-ring prior to installation.
-
Perform a check for refrigerant leakage when charging with refrigerant. Refer to Leak Test.
Other materials
Basic information
The front and rear sonar system in the Nissan Armada is designed to assist the
driver during parking and low-speed maneuvers by detecting obstacles around the
vehicle. Using ultrasonic sensors integrated into the front and rear bumpers, the
Nissan Armada provides audible tones and visual i ...
Engine Assembly
Exploded View
Engine mounting bracket (RH)
Engine mounting insulator (RH)
Stopper bracket (RH)
Engine mounting bracket (LH)
Engine mounting insulator (LH)
Stopper bracket (LH)
Engine mounting insulator (rear)
Comply with the assembly procedure wh ...
Electric Foldable Door Mirror Does Not Operate
Diagnosis Procedure
CHECK DOOR MIRROR MECHANISM
Check the following items.
Damage, deformation and foreign matter pinching of the door mirror mechanism.
Damage of harness due to rubbing and pinching.
Interference with other components.
Installed incorrectly.
Is the inspection result normal ...