Removal and Installation
REMOVAL
Remove rear A/C unit assembly. Refer to Removal and Installation.
Remove cooler packing.
Remove cooler grommet.
Remove heater pipe support fixing screws 
.
Disengage fixing pawls, and then remove heater pipe support from rear A/C unit case LH.
 |
: Pawl |
Remove fixing screw , and then remove heater pipe clamp.
Remove rear heater core.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Replace cooler packing with new one.
Other materials
Operation condition of the air suspension system
AUTO switch
Height level control up switch
Height level control down switch
Vehicle information display menu
The air suspension system in the Nissan Armada operates only when specific conditions
are met to ensure safe and precise height adjustment.
The engine of the Nissa ...
Steering Gear and Linkage
Exploded View
REMOVAL
Member
Cotter pin
Steering gear assembly
: vehicle front
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
DISASSEMBLY
Outer socket
Outer socket lock nut
Boot clamp (small diameter)
Boot
Boot clamp (large diameter)
Inner socke ...
Front Door Finisher
Removal and Installation
CAUTION:
Never damage front door panel.REMOVALCAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.Fully open front door.
Remove pull handle cap.Apply protective tape (A) on front door finisher to protect it from damage.
R ...