InspectionRemoval and Installation
REMOVAL
Remove cowl top cover. Refer to Removal and Installation.
Remove front wiper drive assembly mounting bolts .
Disconnect front wiper drive assembly harness connector and remove harness clip, and then remove front wiper drive assembly.
CAUTION:
Never drop front wiper motor or cause it to co ...
Work Procedure
WARNING:
REPLACE SUB-TCM
Replace Sub-TCM. Refer to Removal and Installation.
>>
GO TO 2.
WRITING Vehicle SPECIFICATIONS
With CONSULT
Ignition switch ON.
Select "Sub-TCM".
Select "Replace ECU".
Perform the work according to the procedure displayed in CONSULT.
>>
GO TO 3.
WRITE MAC K ...
Inspection
INSPECTION AFTER REMOVAL
Surface Distortion
Check the surface distortion of the catalyst converter mating surface (turbocharger side) with a straigtedge (A) and a feeler gauge (B).
Limit 0.15 mm (0.0059 in)
Check the surface distortion of the catalyst converter mating surface (2nd catalyst conv ...