WARNING:
LOOSENESS OF CONNECTED PART
BACKLASH OF JOINT PART

APPEARANCE AND NOISE
VIBRATION
If vibration is present at high speed, adjust the propeller shaft phase first.
Removal and Installation
REMOVAL
Remove front seatback trim and pad. Refer to Disassembly and Assembly.
Disengage fixing pawls and then remove front seatback blower motor.
: Pawl
Disengage front seatback blower motor harness fixing clip.
Disconnect front seatback blower motor connector and then remove front seatback blow ...
Inspection Procedure
Refer to Table of Contents for specific component removal and installation information.
INSTRUMENT PANEL
Most incidents are caused by contact and movement between:
Cluster lid A and instrument panel
Acrylic lens and combination meter housing
Instrument panel to front pillar garnish
Instrument panel ...
Removal and Installation
WARNING:
REMOVAL
NOTE:
CAUTION:
Perform this step when the engine is cold.
Remove Front bumper. Refer to Exploded View.
Remove clip () and remove A/T fluid cooler air guide FR from A/T fluid cooler.
Remove A/T fluid cooler hose A from the A/T fluid cooler using the following procedure:
Remove ...