Nissan Armada 2025-2026 Service and Repair Manual: Rear Sensor Rotor

Removal and Installation

WARNING: CAUTION: Replace wheel hub and bearing assembly as an assembly when replacing because sensor rotor cannot be disassembled. REMOVAL Remove wheel hub and bearing assembly. Refer to the followin ...

Removal and Installation

WARNING: CAUTION: Replace wheel hub and bearing assembly as an assembly when replacing because sensor rotor cannot be disassembled. REMOVAL Remove wheel hub and bearing assembly. Refer to Removal and ...

Other materials:

Symptom Table
Perform “Data Monitor” of CONSULT to check for any malfunctioning item. Check that the data monitor display switches in conjunction with the combination switch operation. If there is a switch whose display does not change, specify the applicable combination switch circuit (INPUT 1 - 6 and OUTPUT ...

Calibration of Decel G Sensor
TCM stores calibration data (inherent characteristic value) of decel G sensor to provide accurate control. Decel G sensor calibration must be performed when the following operation is performed. For work procedure, refer to Work Procedure. Removing/Installing yaw rate/side/decel G sensor Replacing y ...

Warning/indicator lights (other)
Automatic brake hold indicator light (white) In the Nissan Armada, the white automatic brake hold indicator light confirms that the system is activated and currently in standby mode, ready to assist the driver when needed. This feature enhances comfort during stop-and-go driving by mainta ...