Exploded View
 |
Rear suspension member stay |  |
Final drive mounting bracket | ||
 |
: Always replace after every disassembly. | ||||
 |
: N·m (kg-m, ft-lb) | ||||
Removal and Installation
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
REMOVAL
Remove rear suspension member stay mounting bolts and nuts.
Remove rear suspension member stay from vehicle.
Perform inspection after removal. Refer to Inspection.
INSTALLATION
Note the following and, install in the reverse order of removal.
CAUTION:
Never reuse rear suspension member stay mounting nut.
Inspection
INSPECTION AFTER REMOVAL
Check rear suspension member stay for deformation, cracks or damage. Replace it if necessary.
Other materials
Water Hose
Exploded View
A/T assembly
Hose clamp
A/T water hose A
A/T water hose B
Clip A
Clip B
To water pipe. Refer to Exploded View.
To oil cooling exchanger. Refer to Exploded View.
: Always replace after every disassembly.
Removal and Installation
WARNING:
Jacking up or ...
Seat Lifting
Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
CHECK LIFTING SENSOR
Check lifting sensor LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>
Check intermitte ...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...