REMOVAL
Remove the front center console cup holder assembly. Refer to Disassembly and Assembly.
Release the pawls and remove the USB connector
from the front of the front center console cup holder assembly.

![]() | : Pawl |
CAUTION:
Do not damage pawls.
INSTALLATION
Installation is in the reverse order of removal.
Usb Connector
MicrophoneWiring Diagram
BATTERY POWER SUPPLY FUSE No. 27
Click link to Wiring Diagram.
BATTERY POWER SUPPLY FUSE No. 30
Click link to Wiring Diagram.
BATTERY POWER SUPPLY FUSE No. 55
Click link to Wiring Diagram.
BATTERY POWER SUPPLY FUSE No. 58
Click link to Wiring Diagram.
BATTERY POWER SUPPLY FUSE No. 133
Click link to ...
Hammering
Elongation of aluminum alloy during hammering will be greater than with steel plates. Therefore, a wooden or plastic hammer should be used with a softer blow to prevent stretching and work hardening of panels. Observe the following in case body filler is applied after hammering.
Apply wash primer a ...
Diagnosis Procedure
CHECK DOOR SWITCH
Check door switch. Refer to ComponentFunctionCheck.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Replace the malfunctioning door switch
CHECK HOOD SWITCH
Check hood switch. Refer to Component Function Check.
Is the inspection result normal?
YES>>
GO TO ...