Chevrolet Sonic manuals

Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis Procedure

CHECK DOOR SWITCH

Check door switch. Refer to ComponentFunctionCheck.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace the malfunctioning door switch

CHECK HOOD SWITCH

Check hood switch. Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3

NO>>

Replace the malfunctioning door switch

CHECK HEADLAMP FUNCTION

With operating the lighting switch, check that the headlamp is turned ON or OFF.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace malfunctioning parts.

CHECK HORN FUNCTION

Check horn function. Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace the malfunctioning parts.

REPLACE BCM

Replace BCM. Refer to Removal and Installation.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Check intermittent incident. Refer to Intermittent Incident.

Vehicle Security Alarm Does Not Activate
Alarm does not operate when alarm operating condition is satisfied. ...

Panic Alarm Function Does Not Operate
Panic alarm does not operate when press the PANIC ALARM button of Intelligent Key. ...

Other materials:

Measurement with Three-dimensional Measuring Equipment
Measure the dimensions using three-dimensional measuring equipment and compare the measurements with the vehicle body alignment dimensions to identify any deformation in each direction. Several types of equipment are available, such as universal jig type, universal measuring type, laser type, comput ...

Glue System
Glue systems allow pulling when an area is not easily accessible like roof rail or beneath braces. It is also one of the easiest systems to learn. But it is mainly limited to soft dents. A couple of things that affect the glue pulling: Temperature The diameter and the size of the pull knob Applica ...

Removal and Installation
REMOVAL Apply protective tape (A) on the part to protect it from damage. Disengage fixing pawls using remover tool (A), and then remove emblem A. : Pawl Remove emblem bracket mounting bolt. Apply protective tapes (A) on the part to protect it from damage. Cut double-sided tapes using remove ...

© 2014-2026 Copyright www.niarmada.com
 
0.0054