REMOVAL
Remove the map lamp assembly. Refer to Removal and Installation.
Remove the microphone harness connector
.

Use a suitable tool to release pawls and remove the switch finisher
.

![]() | : Pawls |
CAUTION:
Do not damage pawls.
Use a suitable tool to release pawl and remove the microphone
.

![]() | : Pawls |
CAUTION:
Do not damage pawls.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Check the microphone for looseness after the installation.
Microphone
Steering SwitchRefilling
WARNING:
The ignition switch OFF.
Recommended fluid and capacity: Refer to Fluids and Lubricants.
CAUTION:
Carefully fill the fluid. (Fill up for approximately 3 minutes.)
Leave the vehicle for 3 minutes, and check the fluid level again.
Install filler plug on transfer and tighten to the specif ...
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:
The customers are not professionals. Never assume that “mayb ...
Basic information
When towing a Nissan Armada, it is essential to comply with all applicable local
and regional regulations. Using incorrect towing methods or equipment can lead to
serious vehicle damage.
For safe and proper towing, it is highly recommended that a professional towing
service handle the Nissan ...