REMOVAL
Remove engine cover.
If necessary remove the bracket.
CAUTION:
Never damage or scratch engine cover when installing or removing.
INSTALLATION
Installation is the reverse order of removal.
Exploded ViewInspection
NOTE:
The parts (finisher, garnish, headlining, etc.) that into contact with the body side welt is describing as trim.
Check that the lip of body side welt covers onto each trim .
If the lip of body side welt does not cover onto each trim, operate installation step 3. Refer to Removal and Instal ...
Charge Refrigerant
WARNING:
Always use HFO-1234yf for A/C refrigerant. If CFC-12 or HFC-134a is accidentally charged, A/C compressor is damaged due to insufficient lubrication.
Always observe and follow precautions described on refrigerant container. Incorrect handling may result in an explosion of refrigerant contain ...
Inspection
INSPECTION AFTER INSTALLATION
INSPECTION AFTER INSTALLATION
The following are procedures for checking fluid leakage, lubricant leakage.
Before starting engine, check oil/fluid levels including engine coolant and engine oil. If any are less than the required quantity, fill them to the specified level ...