Chevrolet Sonic manuals

Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation

WARNING:

REMOVAL

NOTE:

CAUTION:

Perform this step when the engine is cold.

Remove Front bumper. Refer to Exploded View.

Remove clip () and remove A/T fluid cooler air guide FR from A/T fluid cooler.

Remove A/T fluid cooler hose A from the A/T fluid cooler using the following procedure:

  1. Remove A/T fluid cooler hose cap from A/T fluid cooler hose A .

  2. Install suitable disconnect tool (A) (commercial service tool) on to the A/T fluid cooler hose A at the A/T fluid cooler side.

  3. Rotate suitable disconnect tool (A) (commercial service tool) counter clockwise 60 degrees to release snap ring.

  4. Remove A/T fluid cooler hose A from the A/T fluid cooler.

Remove A/T fluid cooler hose B from A/T fluid cooler using the following procedure:

  1. Remove A/T fluid cooler hose cap from A/T fluid cooler hose B .

  2. Install suitable disconnect tool (A) (commercial service tool) on to the A/T fluid cooler hose B at the A/T fluid cooler side.

  3. Remove A/T fluid cooler hose B from the A/T fluid cooler.

  4. Remove clip () from A/T fluid cooler.

  5. Remove A/T fluid cooler mount bolt () and remove A/T fluid cooler .

  6. Remove clip () and remove A/T fluid cooler air guide RR from A/T fluid cooler.

  7. Remove bracket mounting bolt () and remove bracket .

INSTALLATION

Installation is in the reverse order of removal.

Exploded View
Bracket A/T fluid cooler air guide RR A/T fluid cooler A/T fluid cooler air guide FR Bracket : N·m (kg-m, ft-lb) : N·m (kg-m, in-lb) ...

Inspection and Adjustment
INSPECTION AFTER INSTALLATION Check for A/T fluid leakage. Refer to Inspecton. ADJUSTMENT AFTER INSTALLATION Adjust A/T fluid level. Refer to Adjustment. ...

Other materials:

Exploded View
MANUAL ANTI-DAZZLING Inside mirror base Inside mirror assembly : N·m (kg-m, in-lb) AUTO ANTI-DAZZLING Inside mirror base Inside mirror assembly : N·m (kg-m, in-lb) ...

ENGINE COOLING FAN : Removal & Installation
WARNING: REMOVAL Remove engine cover. Refer to Removal and Installation. Remove air inlet tube 1 and air inlet tube 2. Refer to Removal & Installation. Disconnect engine cooling fan harness connectors . Remove A/T fluid cooler tube from part of engine cooling fan . Remove mounting bolt of ...

How to enable/disable the I-LI system
Example ProPILOT Assist switch Vehicle information display Steering-wheel-mounted control (right side) Basic information In the Nissan Armada, the Intelligent Lane Intervention (I-LI) system can be configured through the vehicle information display and steering wheel controls, pr ...

© 2014-2026 Copyright www.niarmada.com
 
0.0077