Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
WARNING:
REMOVAL
Ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Disconnect the transfer range position sensor connector.
Remove the transfer range position sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Never damage the O-ring of position sensor.
Never contaminate or damage the O-ring mounting surface.
Exploded View
Transfer assembly Transfer range position sensor : N·m (kg-m, in-lb) ...
Inspection
INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
ADJUSTMENT AFTER INSTALLATION
When replacing transfer range position sensor, performe writing unit parameter ...
Other materials:
Work Procedure
When driver monitor camera control unit is replaced, be sure to perform the specified incidental work in order to operate system normally.
DRIVER MONOTOR CAMERA CONTROL UNIT CONFIGURATION
>>
GO TO 2.
CHECK DATA MONITOR
Check that "Face" is "within range" in "Data monitor" of "Driver Monitor ...
Symptom Table
NOTE:
Perform self-diagnoses with CONSULT before performing the symptom diagnosis. If any DTC is detected, perform the corresponding diagnosis.
Symptom Corresponding malfunction part Check item/Reference Front air conditioning system does not activate.
NOTE:
Fail-safe does not activate.
Fuse
A/C ...
General Specifications
Applied model 2WD 4WD VR35DDTT Final drive model R240 Gear ratio 3.357 Number of teeth (Drive gear/Drive pinion) 47/14 Number of pinion gears 2 Drive pinion adjustment spacer type Collapsible Oil capacity Refer to Fluids and Lubricants. ...
0.0053