Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
WARNING:
REMOVAL
Ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Disconnect the transfer range position sensor connector.
Remove the transfer range position sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Never damage the O-ring of position sensor.
Never contaminate or damage the O-ring mounting surface.
Exploded View
Transfer assembly Transfer range position sensor : N·m (kg-m, in-lb) ...
Inspection
INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
ADJUSTMENT AFTER INSTALLATION ...
Other materials:
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
Check DTC.
Perform the following procedure if DTC is detected.
Record DTC and freeze frame data (Print them out using CONSULT.)
Erase DTC.
Ar ...
Removal and Installation
REMOVAL
2WD Models
Remove glove box assembly. Refer to Removal and Installation.
Remove passenger knee air bag module. Refer to Removal and Installation.
Disconnect A/C auto amp. harness connectors and .
: Vehicle front
Remove fixing screw , and then slide A/C auto amp. in the direction indica ...
ELECTRIC INTAKE VALVE TIMING CONTROL MODULE : Exploded View
Bracket Electric intake valve timing control module : Vehicle front : N·m (kg-m, in-lb) ...
0.0055