REMOVAL
Refer to VDC OFF SWITCH : Removal & Installation.
NOTE:
Always remove differential lock mode switch together with select switch unit.
INSTALLATION
Installation is in the reverse order of removal.
Side Oil SealWelding Method for Stud Bolt and Nut
When stud bolts and weld nuts are not welded on the part acquired for repair, and are supplied as separate parts, use the following method to perform welding.
(1) FLANGE BOLT
Remove paint, rust, or oils on the surface of the panel.
Insert the bolt, temporarily tighten the matching nut of the bolt, ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Removal & Installation
WARNING:
DISASSEMBLY
Remove the following parts:
Intake manifold: Refer to Removal and Installation.
Spark plug: Refer to Removal & Installation.
Rocker cover: Refer to Removal and Installation.
Intake manifold: Refer to Removal and Installation.
Fuel tube and fuel injector assembly: Refer to R ...