Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
WARNING:
REMOVAL
Remove rear suspension member stay mounting bolts and nuts.
Remove rear suspension member stay from vehicle.
Perform inspection after removal. Refer to Inspection.
INSTALLATION
Note the following and, install in the reverse order of removal.
CAUTION:
Never reuse rear suspension member stay mounting nut.
Exploded View
Rear suspension member stay Final drive mounting bracket : Always replace after every disassembly. : N·m (kg-m, ft-lb) ...
Inspection
INSPECTION AFTER REMOVAL
Check rear suspension member stay for deformation, cracks or damage. Replace it if necessary. ...
Other materials:
Diagnosis Procedure
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES>>
Check the DTC. Refer to DTC Index.
NO>>
GO TO 2.
CHECK REAR DISC BRAKE SYSTEM (1)
Check if the rear disc brake is dragging. Refer to Inspection.
Is the rear disc brake dragging?
YES ...
Refilling
WARNING:
IN CASE REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
Regarding brake fluid draining, refer to Work Procedure.
IN CASE NOT REPLACING OR REMOVING AND INSTALLING ELECTRICAL BRAKE CONTROL UNIT
CAUTION:
Check that there is no foreign material in the reservoir tank, and refi ...
Inspection
INSPECTION AFTER REMOVAL
When turn the shaft in direction , check returning to direction by spring power.
CAUTION:
The maximum turning force shall be 5 N·m (0.51 kg-m, 44 in-lb).
When turn the shaft in direction , check locking the shaft. INSPECTION AFTER INSTALLATION
ADJUSTMENT AFTER INSTALLATIO ...
0.0052