INSPECTION AFTER REMOVAL
Check rear suspension member stay for deformation, cracks or damage. Replace it if necessary.
Removal and InstallationDisassembly and Assembly
CAUTION:
DISASSEMBLY
Remove armrest (LH seat).Disengage fixing pawls using a remover tool (A), and then remove armrest hinge cover RH.
: Pawl
Remove armrest mounting bolt and armrest hinge mounting nuts .
Remove armrest hinge and armrest hinge bracket RH as a set from center seatback frame. ...
Removal and Installation
REMOVAL
Remove driver air bag module. Refer to Removal & Installation.
Remove steering wheel. Refer to Removal and Installation.
Remove steering column cover upper and lower. Refer to Removal and Installation.
Disconnect spiral cable body side harness connectors .
Left side
: Vehicle front
...
Service Notice or Precautions for Steering System
In case of removing steering gear assembly, make the final tightening with grounded and unloaded vehicle condition, and then check wheel alignment.
Observe the following precautions when disassembling.
Before disassembly, thoroughly clean the outside of the unit.
Disassembly should be done in a clea ...