CAUTION:
Never damage the body panel.
REMOVAL
Remove luggage side lower finisher. Refer to Removal and Installation.
Remove rear floor carpet.
Remove carpet hook.Disengage base fixing pawls using a remover tool (A), and then unlock.

![]() | : Pawl |

INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Check in advance that pawls are accurately aligned with the hole on base mounting part, and then install by pressing in.
HeadliningSTEERING ASSIST SWITCH : Removal & Installation
REMOVAL
Remove instrument pad A. Refer to Removal and Installation.
Remove mounting screws , and remove switch panel from instrument pad A .
Unhook the pawls to remove the switch from the switch panel . 
INSTALLATION
Installation is in the reverse order of removal. ...
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
Before servicing, ignition switch OFF, disconnect battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refe ...
Exploded View
Crankshaft position sensor Dowel pin Drive plate : N·m (kg-m, ft-lb) : N·m (kg-m, in-lb) ...