Removal and Installation
Removal and InstallationRefilling
WARNING:
Remove engine under cover. Refer to Exploded View.
Recommended oil and capacity: Refer to Fluids and Lubricants.
Set a gasket on filler plug, and install it to final drive assembly.
CAUTION:
Never reuse gasket.
Tighten filler plug to the specified torque. Refer to Exploded View.
Insta ...
System Initialization
If any of the following operations are performed, the initialization is necessary for normal operation of power window system. Refer to Work Procedure.
When each power window motor replaced.
Power supply to the each power window motor is not cut off properly.
Removal and installation of regulator as ...
Exploded View
Cylinder body Inner shim cover Inner shim Inner pad Pad wear sensor Pad retainer Torque member Outer pad Outer shim : Vehicle front : N·m (kg-m, ft-lb) : Always replace after every disassembly. ...