REMOVAL
Remove radiator air guide upper. Refer to Removal and Installation.
Remove front combination lamp. Refer to Removal and Installation.
Remove active grille shutter upper side mounting bolts. Refer to Removal and Installation.
Remove hood lock assembly. Refer to Removal and Installation.
Disengage fixing clips from radiator core support.
Remove horn low. Refer to Removal & Installation.
Disconnect intelligent key warning buzzer harness connector. Refer to Removal and Installation.
Remove radiator mounting bolts on radiator core support. Refer to RADIATOR : Removal & Installation.
Remove radiator core support mounting bolts, and then remove radiator core support.
Installation
Install in the reverse order of removal.
Disassembly and Assembly
DISASSEMBLY
Remove door mirror assembly. Refer to Removal and Installation.
Remove door mirror cover. Refer to Removal and Installation.
Disconnect all terminals from harness connector .
NOTE:
Make a mark (short note, photo, etc.) of terminals layout, before disassembly.
Remove harness clip and v ...
Disassembly and Assembly
CAUTION:
OUTSIDE SEAT CUSHION FINISHER OUTER
Disassembly
Disengage fixing pawls, and then remove reclining knob cap.
: Pawl
Disengage fixing portion using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove reclining knob.
Remove ...
Exploded View
Steering member Driver knee air bag module : Always replace after every disassembly. : N·m (kg-m, in-lb) ...