Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Apply protective tape (A) to front door panel 
around front door weather-strip 
fixing clips for preventing damage.
Disengage fixing clips on the reverse side of front door weather-strip using a remover tool (A).
 | : Clip |
CAUTION:
Never damage front door panel.
When removing, never confuse the 2 types of front door weather-strip
fixing clips 
and 
.
Remove front door check link mounting bolt of vehicle body side.
Remove front door weather-strip from front door panel.
INSTALLATION
Install in the reverse order of removal.
Other materials:
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support back door with a proper material and use protective tape or shop cloth to protect back door and body from falling and damage when removing and installing spindle unit.
REMOVAL
Disconnect battery cable from 12V battery negativ ...
Removal and Installation
CAUTION:
Never damage the back door panel.
REMOVAL
CAUTION:
Remove back door lower finisher. Refer to Removal and Installation.
Apply protective tapes (A) on back door panel to protect it from damage.
Insert remover tool (A) close to clip when starting to remove back door inner finisher.
Disengag ...
Work Flow
WORK FLOW
STEP DESCRIPTION STEP 1 Get detailed information about the conditions and the environment when the incident occurred.
The following are key pieces of information required to make a good analysis: WHAT Vehicle Model, Engine, Transmission/Transaxle and the System (i.e. Radio). WHEN D ...
0.0053