Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Disengage hood lock control handle fixing pawl, and then remove hood lock control handle.
 | : Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
After installation, perform hood lock control inspection. Refer to Inspection.
After installation, check hood open/close operation.
Other materials:
Shrinking Methods
(1) ELECTRIC WELDING MACHINE
The body panel is connected to the negative power supply terminal and the tip is connected to the positive terminal. Then, an electric current is supplied to heat the panel. The shrinking principle is the same as that of gas welding. This method features no hammering and ...
Diagnosis Procedure
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT
Check that DTC is not detected with automatic back door control unit.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to DTC Index.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to Component Function Check. ...
Exploded View
Bank 1 side
Ignition coil Spark plug Rocker cover Rocker cover gasket Blow-by hose 1 (bank 1) Clamp Blow-by hose 2 (bank 1) Intake camshaft position sensor Exhaust camshaft position sensor Crankcase pressure sensor Comply with the installation procedure when tightening. Refer to Removal ...
0.0051