Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Remove rear door finisher. Refer to Removal and Installation.
Disconnect rear door lock assembly harness connector.
Disengage rear door lock knob cable fixing clip.
Remove rear door inner frame rear. Refer to Removal and Installation.
Remove rear door outside handle bracket. Refer to Removal and Installation.
Rear door lower sash lower. Refer to Removal and Installation.
Remove rear door lock assembly mounting TORX bolts.
Disengage rear door lock assembly fixing pawls, and then remove rear door lock assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Never reuse rear door lock assembly mounting TORX bolt. Always replace it with a new one when it is removed.
When installing, tighten mounting TORX bolts according to numerical order 1→3 as shown in figure.
When installing, be careful that cable is routed normally.
When connecting rear door inside handle cable to rear door inside handle, check that rear door inside handle cable is properly engaged with rear door inside handle.
When connecting rear door lock knob cable to rear door finisher, check that rear door lock knob cable is properly engaged with rear door finisher.
After installation, check rear door lock. Refer to Inspection.
Inspection
After opening and closing the door, check that door is fixed to the vehicle body normally.
Check the lock/unlock operation of door lock. ...
Other materials:
Roof Rail
Work after roof is removed.
: Vehicle front : Drill φ8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel). : Drill φ11 mm (0.43 in) hole for the plug welding hole (ultra high strength steel). : Weld the parts onto the back of the component part. : Welding method, the number o ...
Work Procedure
CHOOSE METHOD
There are two ways of learning method.
Which method do you choose?
With CONSULT>>
GO TO 2.
Without CONSULT>>
GO TO 3.
WITH CONSULT
With CONSULT
Ignition switch ON.
Perform "Steering column position learning” in "Work support" mode of "STEERING COLUMN” using CONSULT.
...
4WD shift switch
Example
Select the appropriate 4WD mode in the Nissan Armada by shifting the 4WD
switch to AUTO, 4H, or 4L (if equipped), depending on current road and driving
conditions. This flexibility allows the Nissan Armada to adapt to both on-road
and off-road environments.
When AUTO mode ...
0.0053