Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
CAUTION:
When replacing the Intelligent Key unit, always replace it with a new one. The functions controlled by the Intelligent Key unit does not operate properly in case of reuse of the Intelligent Key unit from another vehicle.
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect Intelligent Key unit harness connector, and then remove Intelligent Key unit 
.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to perform ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT when replacing Intelligent Key unit. Or not doing so, Intelligent Key unit control function does not operate normally. Refer to Description.
Other materials:
Work Procedure
Description
When replacing or removing the Head Up Display unit, distortion calibration of the display and adjustment of the display position are required.
Work Procedure
REPLACE HEAD UP DISPLAY UNIT
Replace Head Up Display unit. Refer to Removal and Installation.
>>
GO TO 2.
PERFORM CALIBRA ...
Removal and Installation
REMOVAL
Disengage hood lock control handle fixing pawl, and then remove hood lock control handle.
: Pawl
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
After installation, perform hood lock control inspection. Refer to Inspection.
After installa ...
Work Procedure
TPMS REGISTRATION WITH TIRE PRESSURE SENSOR ACTIVATION TOOL [KV48105501 (J-45295-A)]
With CONSULT
CAUTION:
Always use CONSULT when tire pressure sensor ID registration. (It cannot be ID registration other than with CONSULT.)
Ignition switch ON.
Select “WORK SUPPORT” in AIR PRESSURE MONITOR. The ...
0.0059