REMOVAL
Remove automatic back door switch finisher. Refer to Removal and Installation.
Disengage automatic back door close switch assembly fixing pawls using a remover tool (A), and then remove automatic back door close switch assembly
from automatic back door switch finisher.

![]() | : Pawl |
INSTALLATION
Install in the reverse order of removal.
Diagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning part.
CHECK HIGH BEAM REQUEST SIGNAL
With CONSULT
Select “High beam request” in “Data Monitor” mode of ...
Exploded View
Grommet Rear spoiler cover Rear spoiler : Clip : Pawl : Always replace after every disassembly. , , : Indicates that the part is connected at points with same symbol in actual vehicle. ...
Removal and Installation
REMOVAL
Without Dynamic Digital Suspension and Electronic Air Suspension
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Set suitable jack under lower link.
CAUTION:
Never damage lower link.
Remove brake hose bracket from steering knuckle. Refer to Removal and Installation.
Sep ...