REMOVAL
Remove glass lid. Refer to Removal and Installation.
Tilt glass lid down.
Remove fixing screws
, and then remove drain assembly.

INSTALLATION
Install in the reverse order of removal.
Exploded View
Glass Lid GuideRemoval and Installation
REMOVAL
Using a suitable tool, release clips , and remove cover .
Disconnect inside camera (driving video recorder) harness connector.
Remove mounting screws , and remove inside camera (driving video recorder) from inside camera bracket.
Remove mounting screws , and remove inside camera bracket ...
Inspection and Repair
INSPECTION
When measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger.
Attach probe circuit tester (in Volt range) to middle portion of each filament.
If a filament is burned out, circuit tester registers 0 or battery voltage ...
Inspection
INSPECTION AFTER REMOVAL
Appearance
Propeller Shaft Runout
Propeller shaft runout : Refer to Propeller Shaft Tube.
Journal Axial Play
Journal axial play : Refer to Journal.
Joint Flex Torque
Joint flex torque : Refer to Journal.
Center Bearing
Check center bearing for noise and damage. ...