Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove front bumper fascia. Refer to following.
City model: Removal and Installation.
Off road model: Removal and Installation.
Remove front combination lamp mounting bolts.
Pull out front combination lamp forward the vehicle.
Disconnect front combination lamp harness connectors, and then remove front combination lamp.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, perform aiming adjustment. Refer to Adjustment.
Exploded View
Radiator core support Front combination lamp Front fender assembly : N·m (kg-m, in-lb) ...
Replacement
CAUTION:
HEADLAMP (Hi)
CAUTION:
Replacement of a single part is not possible due to the adoption of LED. For replacement, replace front combination lamp as a set. Refer to Removal and Installation.
HE ...
Other materials:
Removal and Installation
WARNING:
REMOVAL
Disconnect the battery cable from negative terminal. Refer to Removal and Installation
Drain brake fluid. Refer to Draining.
Disconnect ABS actuator and electric unit (control unit) harness connector , follow the procedure below.
Pull the lock of the connector toward the directi ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Brake system
Braking precautions
The brake system in the Nissan Armada is engineered with dual independent hydraulic
circuits to enhance safety. This design ensures that even if one circuit fails,
braking capability is still maintained on two wheels, allowing the driver to retain
a level of control in eme ...
0.0053