CAUTION:
REMOVAL
CAUTION:
Disengage map lamp assembly fixing metal clips and pawls using a remover tool (A), and then pull out map lamp assembly from headlining assembly.

![]() | : Pawl |
![]() | : Metal clip |
Disconnect harness connectors, and then remove map lamp assembly.
INSTALLATION
Install in the reverse order of removal.
Map Lamp
ReplacementExploded View
Rear bumper fascia assembly Rear reflex reflector LH Rear reflex reflector RH : Pawl : N·m (kg-m, in-lb) ...
Exploded View
Bracket Air tank Clip Protector Air connector Air tube To air suspension control module :Vehicle front : Always replace after every disassembly. :N·m (kg-m, ft-lb) :N·m (kg-m, in-lb) :Apply silicone sealant. ...
Diagnosis Procedure
PERFORM ECM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ECM”.
Is any DTC detected?
YES >>
Check DTC detected item. Refer to DTC Index.
NO>>
GO TO 2.
PERFORM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for "AWD/4WD".
Is any DTC detected?
YES>>
Check the DTC ...