Refilling
RotationRemoval & Installation
REMOVAL
Remove the map lamp assembly. Refer to Removal and Installation.
Remove the microphone harness connector .
Use a suitable tool to release pawls and remove the switch finisher .
: Pawls
CAUTION:
Do not damage pawls.
Use a suitable tool to release pawl and remove the microphone .
: ...
Diagnosis Procedure
CHECK TELLTALE (BULB CHECK)
Check the telltale "BULB CHECK" below.
TelltaleRefer to "BULB CHECK"ABS warning lampRefer to ABS Warning Lamp.Brake system warning lampRefer to Brake System Warning Lamp.Electronic parking brake warning lampRefer to Electric Parking Brake Warning Lamp.Brake warning lampRe ...
FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY : Removal & Installation
WARNING:
WARNING:
Be sure to read “General Precautions” when working on the fuel system. Refer to GENERAL PRECAUTION : Precautions.
REMOVAL
Check fuel level on a level ground. If the fuel level is 7/8 of the fuel tank (full or nearly full), draw appropriate amount of fuel from the fuel tank.
...