Nissan Armada 2025-2026 Service and Repair Manual: Rotation
WARNING:
Follow the maintenance schedule for tire rotation service intervals. Refer to General Maintenance.
When installing the wheel, tighten wheel nuts to the specified torque. Refer to ROAD WHEEL TIRE : Exploded View.
CAUTION:
When installing wheels, tighten them diagonally by dividing the work two to three times in order to prevent the wheels from developing any distortion.
Be careful not to tighten wheel nut at torque exceeding the criteria.
Use NISSAN genuine wheel nuts for aluminum wheels.
Perform the ID registration, after tire rotation. Refer to Work Procedure.
Road Wheel
...
Adjustment
WARNING:
BALANCING WHEELS (BONDING WEIGHT TYPE)
Preparation Before Adjustment
Using releasing agent, remove double-faced adhesive tape from the road wheel.
CAUTION:
Be careful not to scratch the road ...
Other materials:
Inspection of Welded Portion
Spot welded portions can be checked by the destructive inspections explained below. They can be easily adopted when welding. Before and after welding, you should perform these destructive inspections to check the strength of the welded portions.
The welding spots should be equally spaced and arrange ...
When SRS is activated in a collision
CAUTION:
WORK PROCEDURE
Replace the following components.
Front seatback assembly (on the side on which side air bag is activated).
Rear seatback assembly (on the side on which side air bag is activated).
Door finisher (on the side on which door-mounted curtain air bag is activated).
Pop-up roll bar ...
Removal and Installation
WARNING:
REMOVAL
Remove oil pan. Refer to Removal and Installation.
Remove heat shield mounting bolts () and heat shield .
Disconnect harness connector from control valve & TCM.
NOTE:
Rotate connector counterclockwise then pull out to remove as shown.
Remove control valve & TCM mounting ...
0.006