Spark Plug
Service DataWork Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Ignition switch ON.
Perform writing vehicle specification to BCM following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
NOTE:
Log in the network according to CONSULT guidance.
>>
WORK END ...
Removal and Installation
REMOVAL
Remove luggage rear plate. Refer to Removal and Installation.
Remove mounting TORX bolts, and then remove back door striker.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Never reuse TORX bolt. Always replace it with a new one when it is re ...
Disposal
CAUTION:
When performing disposal operation, wear the protective glasses and protective gloves.
Fix hood stay using a vise (C).
CAUTION:
When cutting a hole on hood stay, always cover a hacksaw (A) using a shop cloth (B) to avoid scattering metal fragments or oil.
Using hacksaw slowly make 2 hole ...