Nissan Armada 2025-2026 Service and Repair Manual: Disposal
CAUTION:
When performing disposal operation, wear the protective glasses and protective gloves.
Fix hood stay 
using a vise (C).
CAUTION:
When cutting a hole on hood stay, always cover a hacksaw (A) using a shop cloth (B) to avoid scattering metal fragments or oil.
Using hacksaw slowly make 2 holes in the hood stay, in numerical order as shown in the figure.
| A: | 20.0 mm (0.787 in) |
 : | Cut at the groove. |
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support hood with a proper material and use protective tape or shop cloth to protect hood and body from falling and damage when removi ...
Hood Insulator
...
Other materials:
Tools for Pulling
If it is impossible to gain access to the damaged area, dents can be pulled out and repaired.
METHODS
There are many techniques to repairing a dent, but there are basically two methods. Both methods can be used depending on the type of damage. Each method has its own advantages and disadvantages.
...
Inspection
AFTER A COLLISION
WARNING:
To avoid the risk of death or severe injury:
Replace any seat belt assembly (including anchor bolts) if:
Anchor bolts are deformed or worn out.
PRELIMINARY CHECKS
Check the shoulder seat belt guide for third seat. Check that guide swivels freely and that webbing lays flat ...
Lights
Basic information
Example
Front parking light / daytime running light / front turn signal
Map light
Headlight (low beam)
Front fog light (if equipped)
Headlight (high beam)
Front side marker light
Puddle light (if equipped)
Side turn signal (if equipped)
Rear personal light
...
0.0054