Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Remove luggage rear plate. Refer to Removal and Installation.
Remove mounting TORX bolts, and then remove back door striker.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Never reuse TORX bolt. Always replace it with a new one when it is removed.
Before tighten back door striker mounting TORX bolts to the specified torque, perform the fitting adjustment. Refer to Adjustment.
Back Door Hinge
...
Other materials:
Additional Service When Replacing Intelligent Key Unit
CAUTION:
When replacing the Intelligent Key unit, always replace it with a new one. The functions controlled by the Intelligent Key unit does not operate properly in case of reuse of the Intelligent Key unit from another vehicle.
Perform the following operations when replacing Intelligent Key unit. ...
Exploded View
Transmission housing Starter motor cover 1 Starter motor cover 2 “B” terminal harness Starter motor harness connector Starter motor : Vehicle front : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb) : Indicates that the part is connected at points with same symbol in actual vehicle. ...
EVAP CANISTER : Removal & Installation
WARNING:
REMOVAL
EVAP canister
Remove spare tire. Refer to Removal & Installation.
Disconnect EVAP control system pressure sensor harness connector and vent hose 4 from EVAP canister .
Disconnect EVAP canister vent control valve harness connector and vent hose 1 from EVAP canister .
Hold ...
0.0061