Nissan Armada 2025-2026 Service and Repair Manual: Safety and Health
Consideration for workers' safety and health should be deemed as the most important item. In reality, it is essential that measures be established to prevent accidents and to make the work environment safer and healthier.
When performing a frame repair work, always observe the instructions described in the section “SAFETY AND HEALTH”. Refer to Precautions for Operation.
Frame Securing Method
To straighten a damaged frame, the frame must be anchored securely. This manual describes examples of appropriate frame anchoring for each type of straightening equipment as well as additional anchori ...
Elimination of Residual Stress
When repairing a deformed frame, elimination of any residual stress should be given higher priority.
This manual describes the method for eliminating any residual stress, which must be referenced as a ...
Other materials:
Examination of Panel Damage
CAUTION:
This repair method should not be used on rails and reinforcements.
It is difficult to find minor deformation or panel irregularity, particularly, at the final stage of repair. This section explains how to determine if a vehicle has minor panel deformation.
(1) VISUAL CHECK
Check the affecte ...
Work Procedure
DESCRIPTION
The purpose of the operation inspection is to check that the individual system operates normally.
Check condition : Engine running at normal operating temperature.
OPERATION INSPECTION (DISPLAY UNIT)
CHECK MEMORY FUNCTION
Touch AUTO switch to activate air conditioning.
Set temperatur ...
Work Procedure
WARNING:
UNIT CHARACTERISTIC VALUE CONFIRMATION
: Side surface : Top surface
NOTE:
There is space on the top to check with the camera.
>>
GO TO 2.
WRITING UNIT PARAMETER
With CONSULT
Ignition switch ON.
Select “Work support” in “AWD/4WD”.
Perform “Unit parameter writing” to t ...
0.0051