When repairing a deformed frame, elimination of any residual stress should be given higher priority.
This manual describes the method for eliminating any residual stress, which must be referenced as a guideline for elimination of residual stress.
Safety and Health
Repairable Frame DamagesWhen SRS is not activated in a collision
CAUTION:
WORK PROCEDURE
Check the SRS components using the table below.
Ensure entire SRS operates properly.
SRS INSPECTION (FOR REAR COLLISION)
Part Inspection Driver air bag module If the driver air bag has not been activated:
Remove driver air bag module. Check harness cover and connectors fo ...
Removal and Installation
WARNING:
REMOVAL
Disconnect the battery cable from negative terminal. Refer to Removal and Installation
Drain brake fluid. Refer to Draining.
Disconnect ABS actuator and electric unit (control unit) harness connector , follow the procedure below.
Pull the lock of the connector toward the directi ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...