Restraints
PrecautionHow to Handle Battery
CAUTION:
After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.
WHERE TO CONNECT JUMPER CABLE WHEN THE 12V BATTERY IS DISCHARGED
CAUTION:
If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster ...
Removal and Installation
REMOVAL
Without Dynamic Digital Suspension and Electronic Air Suspension
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Loosen rear lower link mounting nuts (frame side).
Set suitable jack under axle housing.
CAUTION:
Check the stable condition when using a suitable jack.
Nev ...
Work Procedure
CAUTION:
After removing/replacing the yaw rate/side/decal G sensor or replacing the ABS actuator and electric unit (control unit), the decel G sensor of the ABS actuator and electric unit (control unit) must be calibrated first. Refer to Description.
PREPARATION BEFORE CALIBRATION PROCEDURE
Park the ...