Nissan Armada 2025-2026 Service and Repair Manual: Service Data and Specifications (sds)
Wheel Alignment
WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
Item Standard Camber
Degree minute (Decimal degree) Minimum −0°50′ (−0.83°) Nominal −0°05′ (−0.08°) Maximum 0° ...
Other materials:
Inspection
INSPECTION AFTER REMOVAL
When turn the shaft in direction , check returning to direction by spring power.
CAUTION:
The maximum turning force shall be 5 N·m (0.51 kg-m, 44 in-lb).
When turn the shaft in direction , check locking the shaft. INSPECTION AFTER INSTALLATION
ADJUSTMENT AFTER INSTALLATIO ...
Work Procedure
WARNING:
UNIT CHARACTERISTIC VALUE CONFIRMATION
: Side surface : Top surface
NOTE:
There is space on the top to check with the camera.
>>
GO TO 2.
WRITING UNIT PARAMETER
With CONSULT
Ignition switch ON.
Select “Work support” in “AWD/4WD”.
Perform “Unit parameter writing” to t ...
Work Flow
WORK FLOW (WITH GR8-1200 NI)
Starting System Diagnosis With GR8-1200 NI
To test the starting system, use the following special service tool:
Multitasking battery and electrical diagnostic station GR8-1200 NI
NOTE:
Refer to the diagnostic station Instruction Manual for proper starting system diagnos ...
0.0051