AdjustmentRemoval and Installation
REMOVAL
Remove instrument lower panel LH. Refer to Removal and Installation.
Remove steering column control module bracket mounting screw .
Disconnect steering column control module connector.
Remove steering column control module.
INSTALLATION
Note the following items, and then install in the rev ...
Work Procedure
PERFORM INITIALIZATION POSITION ADJUSTMENT
Select "ABS", "Work support", and "Initialization position adjustment" according to this order.
CAUTION:
Never operate the parking brake switch.
Never depress the brake pedal.
Touch "START".
>>
GO TO 2.
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Igni ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...