Removal and Installation
REMOVAL
Operate rear wiper to the service position. Refer to System Description.
Lift up rear wiper arm, and then lock back rear wiper arm.
Remove rear wiper blade 
from rear wiper arm 
while rotating rear wiper blade in the direction indicated by the arrows as shown in the figure.
CAUTION:
After rear wiper blade is removed, wrap rear wiper arm with a shop cloth and fold it down so that rear wiper arm does not fall against and damage back door window glass.
INSTALLATION
Install in the reverse order of removal.
Other materials
Rear Heater Core
Removal and Installation
REMOVALRemove rear A/C unit assembly. Refer to Removal and Installation.
Remove cooler packing.
Remove cooler grommet.
Remove heater pipe support fixing screws .
Disengage fixing pawls, and then remove heater pipe support from rear A/C unit case LH.
: Pawl
Remove fi ...
Drain Hose
Exploded View
Refer to Exploded View.
Removal and Installation
REMOVALFrontRemove headlining. Refer to Removal and Installation.
Remove instrument panel assembly. Refer to Removal and Installation.
Remove front drain hose from fixing clips.
Disconnect front drain hose from moonroof unit assembly and ...
Additional Service When Replacing Driver Monitor Camera Control Unit
Work Procedure
When driver monitor camera control unit is replaced, be sure to perform the specified incidental work in order to operate system normally.DRIVER MONOTOR CAMERA CONTROL UNIT CONFIGURATION
Perform saving vehicle internal information according to "Replace ECU" in CONSULT Operation Manual ...