Exploded View
 |
Sonar control unit | ||||
 |
: N·m (kg-m, in-lb) | ||||
Removal & Installation
REMOVAL
CAUTION:
Before replacing sonar control unit, perform “ADDITIONAL SERVICE WHEN REPLACING SONAR CONTROL UNIT". For details, Refer to Work Procedure
Remove the luggage side lower finisher LH. Refer to Removal and Installation
Disconnect the harness connectors 
from sonar control unit .
Remove the sonar control unit mounting bolt , and then remove the sonar control unit .
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When replacing the sonar control unit, perform "ADDITIONAL SERVICE WHEN REPLACING SONAR CONTROL UNIT". Refer to Work Procedure.
Other materials
Lane Change Assist (ProPILOT Assist 2.1)
Basic information
Lane Change Assist in the Nissan Armada is an advanced feature of ProPILOT Assist
2.1, designed to support the driver during lane changes under appropriate conditions.
Before using this system, it is recommended to fully understand the ProPILOT Assist
functionality and its o ...
Evap Leak Check
EVAP CANISTER : Leak Check
CAUTION:
Never use compressed air or a high pressure pump.
Never exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP system.
NOTE:
Never start engine.
Improper installation of EVAP service port adapter to the EVAP service port may cause a leak.
WITH CONSU ...
Transfer Fluid
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
FLUID LEAKAGECheck t ...