Diagnosis Procedure
CHECK STEERING TILT MECHANISM
Check for the following.
-
Mechanism deformation or pinched foreign materials.
-
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK TILT SWITCH
Check tilt switch. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK TILT MOTOR
Check tilt motor. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials
Rear-facing child restraint installation using the seat belts
WARNING
When installing a rear-facing child restraint in the Nissan Armada, the
three-point seat belt must be switched to Automatic Locking Retractor (ALR)
mode.
Failure to activate ALR mode may result in the child restraint not being
securely fixed. This could cause the seat to sh ...
Brake Pad
Exploded View
Cylinder body
Inner shim cover
Inner shim
Inner pad (with pad wear sensor)
Return spring
Pad retainer
Torque member
Outer pad
Outer shim
Outer shim cover
: vehicle front
1: Apply MOLYKOTE® AS880N or siliconebased grease. ...
Rack End Value Reset
Work Procedure
NOTE:
When steering column assembly and steering gear assembly are replaced, rack end value reset (steering wheel turning angle learning value reset) is performed.
When the toe-in is adjusted, back end value reset (steering wheel turning angle learning value reset) is performed.
...