Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>GO TO 2.
NO>>Refer to Diagnosis Procedure.
CHECK TELESCOPIC SENSOR
Check telescopic sensor. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials
Engine Mechanical Service Data and Specifications
Engine Assembly
GENERAL SPECIFICATIONS Cylinder arrangement
V-6
Displacement cm3 (cu in)
3,492 (213.08)
Bore and stroke mm (in)
86.0 x 100.2 (3.386 x 3.944 )
Valve arrangement
DOHC
Firing order
1-2-3-4-5-6
Number of piston rings
Compression
2
Oil
1 ...
Front Fillet Molding
Removal and Installation
REMOVALRemove front fillet molding fixing screws .
Apply protective tape (A) on the part to protect it from damage.
Disengage front fillet molding fixing pawl indicated by arrows as shown in the figure.
: Pawl
Disengage fixing clips, and then remove front fillet m ...
Side Camera
Removal and Installation
REMOVAL
Remove the door mirror finisher. Refer to Disassembly and Assembly.
Remove the side camera mounting screw , and then remove the side camera .
INSTALLATIONInstall in the reverse order of removal.
Perform parameter writing. (With ProPILOT Assist 2.1) Refer to Work ...