Diagnosis Procedure
CHECK STEERING TILT MECHANISM
Check for the following.
-
Mechanism deformation or pinched foreign materials.
-
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK TILT SWITCH
Check tilt switch. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK TILT MOTOR
Check tilt motor. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials
Memory Storing
Description
Always perform the memory storage when the driver seat control unit or steering column control module is replaced. The memory function will not operate normally if no memory storage is performed. For details, refer to Work Procedure.
Work Procedure
Memory Storage ProcedureTwo positions f ...
Hands Free Sensor
Description
Automatic back door open/close function does not operate properly when using hands free sensor.
Diagnosis Procedure
CHECK OPERATION WITH PROPER KICK
Check that proper operating conditions have been met for hands free sensor operation. Refer to System Description. Perform kick with proper ...
Front Door Weather-Strip
Removal and Installation
REMOVALApply protective tape (A) to front door panel around front door weather-strip fixing clips for preventing damage.
Disengage fixing clips on the reverse side of front door weather-strip using a remover tool (A).
: Clip
CAUTION:
Never damage front door pane ...