CAUTION:
Always perform stroke sensor calibration before driving after any of the following operations is performed.
×: Necessary, -: Not necessary
| Procedure | Stroke sensor calibration |
|---|---|
| Removing/installing electrical brake control unit | × |
| Replacing electrical brake control unit | × |
| Removing/installing stroke sensor | × |
| Replacing stroke sensor | × |
| Removing/installing brake pedal | × |
| Replacing brake pedal | × |
| Adjusting brake pedal each height | × |
Work Procedure
Work ProcedureRemoval and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect back door auto closure control unit harness connector.
Remove back door auto closure control unit mounting nuts , and then remove back door auto closure control unit .
INSTALLATION
Install in the reverse o ...
Diagnosis Procedure
CHECK DOOR LOCK FUNCTION
Check door lock using door request switch.
Does door lock with door request switch?
YES>>
GO TO 2.
NO>>
Refer to DTC Diagnosis Procedure.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to Diagnosis Procedure.
Is the inspection ...
Removal and Installation
WARNING:
Removal
CAUTION:
Spiral cable may be cut if steering wheel turns while separating steering column assembly and steering gear assembly. Be sure to secure steering wheel using string to avoid turning.
Set vehicle to the straight-ahead position.
Fix the steering wheel.
Remove driver knee air b ...