Description
Sunshade does not operate normally.
-
Sunshade OPEN/CLOSE does not operate.
-
Sunshade OPEN/CLOSE operation is slow.
-
Judder occurs during OPEN/CLOSE operation of sunshade.
Diagnosis Procedure
CHECK SUNSHADE
Check sunshade for damage, deformation, of interference with other parts.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
YES>>
GO TO 4.
NO>>Repair or replace the malfunctioning parts.
CHECK SUNSHADE SWITCH
Check sunshade switch. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Repair or replace the malfunctioning parts.
CHECK COMMUNICATION SIGNAL CIRCUIT
Check communication signal circuit. Refer to Component Function Check.
Is the inspection result normal?
YES>>Replace sunshade motor assembly. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
Other materials
Precautions
PRECAUTIONS FOR SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG AND SEAT BELT PRE-TENSIONER : Precautions
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front p ...
Front Wiper Blade
Removal and Installation
CAUTION:
Clean windshield glass and front wiper refill so that windshield glass may not be damaged by dust, etc. REMOVALOperate front wiper to the auto stop position. Refer to System Description.
Lift up front wiper arm, and then lock back front wiper arm.
Slide to remove fr ...
Microphone
Removal & Installation
REMOVALRemove the map lamp assembly. Refer to Removal and Installation.
Remove the microphone harness connector .
Use a suitable tool to release pawls and remove the switch finisher .
: Pawls
CAUTION:
Do not damage pawls.
Use a suitable tool to release pawl and re ...