Work ProcedureInspection
AFTER A COLLISION
WARNING:
To avoid the risk of death or severe injury:
Replace any seat belt assembly (including anchor bolts) if:
Anchor bolts are deformed or worn out.
PRELIMINARY CHECKS
Check the shoulder seat belt guide for second seat. Check that guide swivels freely and that webbing lays fla ...
Diagnosis Procedure
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ABS”.
Is DTC detected?
YES>>
Check the DTC. Refer to DTC Index.
NO>>
GO TO 2.
CHECK PARKING BRAKE ACTUATOR
Pull or push parking brake switch, check operation sound of parking brake actuator.
Is the inspection resul ...
General Precautions
Ignition switch OFF and disconnect the battery cable from the negative terminal before connecting or disconnecting the A/T assembly connector. Because battery voltage is applied to TCM even if ignition switch is switched OFF.
Perform “DTC (Diagnostic Trouble Code) CONFIRMATION PROCEDURE” after ...