Description
The parking brake braking force is too high.
Diagnosis Procedure
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK REAR DISC BRAKE SYSTEM (1)
Check if the rear disc brake is dragging. Refer to Inspection.
Is the rear disc brake dragging?
YES>>Check the rear disc brake system. Refer to Inspection and Adjustment.
NO>>GO TO 3.
CHECK REAR DISC BRAKE SYSTEM (2)
-
Depress the brake pedal 3 times or more.
-
Drive the vehicle at 30 km/h (19 MPH) or more.
-
Stop the vehicle.
-
Depress the brake pedal 3 times or more again.
Is the braking force of parking brake is high?
YES>>Replace the rear brake caliper assembly. Refer to Removal and Installation.
NO>>INSPECTION END
Other materials
Brake Pedal
Exploded View
Stroke sensor
Clevis pin
Brake pedal assembly
Brake pedal pad
Snap pin
Stop lamp switch
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Apply Nissan multi-purpose Special Grease No.2 or equivalent.
: Always replace after every disassembly.
Removal and ...
Additional Service When Replacing Power Window Motor
Description
When each power window motor replaced, the initialization is necessary for normal operation of power window system. Refer to Work Procedure.CAUTION:
The following specified operations cannot be performed under the non-initialized condition.
Auto-up operation
Anti-pinch function
Wo ...
Intelligent Rear View Mirror System Does Not Operate
Diagnosis Procedure
INTELLIGENT REAR VIEW MIRROR FUNCTIONAL INSPECTION
Ignition switch ON.
Check the intelligent rear view mirror system is operating normally after setting power supply lever of intelligent rear view mirror lower part to ON.
Is the inspection result normal?
YES>>
GO TO ...