The parking brake braking force is too high.
Diagnosis Procedure
Diagnosis ProcedurePrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Door Does Not Lock/unlock and Engine Does Not Start (req Sw/push Sw) (one Key)
Door does not lock/unlock with request switch, and engine does not start when push-button ignition switch is pressed while carrying Intelligent Key. (One Intelligent Key has the symptom, other keys operate normally.)
Door lock operation (remote keyless entry) Door lock operation (request switch of ...
Inspection
WARNING:
INSPECTION
Uneven wear
Check the uneven wear of the disc rotor using a micrometer. Replace the disc rotor if the thickness is below the wear limit.
2WD: Refer to Removal and Installation.
4WD: Refer to Removal and Installation.
Thickness variation (measured at 8 positions) : Refer to Fr ...