Change of System Mode
Parking Brake Does Not ReleaseRemoval and Installation
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disengage body harness fixing clips , and then remove body harness from map lamp bracket.
: Vehicle front
Remove map lamp bracket.
Without moonroof models
Remove map lamp bracket fixing clips .
Disengage fixing metal cli ...
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
Before servicing, ignition switch OFF, disconnect battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refe ...
Commercial Service Tools
Tool name Description Drift
a: 61.0 mm (2.402 in) dia.
b: 56.3 mm (2.217 in) dia.
Installing front oil seal Drift
a: 66.3 mm (2.610 in) dia.
b: 61.9 mm (2.437 in) dia.
Installing rear oil seal Drift
a: 68.6 mm (2.701 in) dia.
b: 58.0 mm (2.283 in) dia.
Installing input oil seal Power tool
...