Removal and Installation
Removal and InstallationPRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Inspection and Adjustment
REAR WASHER NOZZLE (CHECK VALVE)
Inspection
Check that air can pass through by blowing forward direction (toward nozzle side), and check that air cannot pass through by sucking reverse direction (toward washer tank side).
REAR WASHER NOZZLE SPRAY POSITION
Inspection
NOTE:
Refer to the figure below ...
General Specification
Applied model Axle 2WD Engine VR35DDTT Transmission A/T Rear final drive R240 without differential lock Propeller shaft model 3F C-C-C Number of joints 3 Joint type 1st joint Universal (Solid type) 2nd joint Universal (Solid Type) 3rd joint Universal (Solid Type) Coupling method ...